At BoseIronFactory, I handle everything from responding to inquiries to grinding, manufacturing, and assembling golf clubs.
Therefore, we can manufacture golf clubs that suit each individual, and we can customize them by changing the plating, changing the grip/shaft, laser engraving, etc.
Since there are so many customizable areas, we only list it in standard form on the WebShop, but please feel free to contact us and we will do our best to accommodate you.
You can contact us via message or email (seabose@me.com).
We appreciate your understanding that we may not be able to respond immediately depending on the time difference or regular holidays.
-
The ultimate #0 iron HAYABUSA Iron FUJIKURA VENTUS HB BLUE or BLACK
¥77,000($531.30)
Since this is not a stock item and each piece is assembled by hand, it will take approximately 7 days to ship after confirming payment. Also, since it is shipped outside of Japan, it will take some time to arrive. Please note that we cannot sell to those who cannot wait. In addition, we test our products with driving contest players with a head speed of about 60 m/s before selling them, but if you duff or mis-hit the ball strongly, the shaft may break. If you mis-hit or duff the ball strongly, the shaft may break with any club, so it is not a manufacturing defect on our part. Therefore, in the unlikely event that the shaft breaks, there is no guarantee, so please use it at your own risk. The No. 0 iron is finally available in the HAYABUSA Iron! ! It has a loft of 12 degrees and is designed specifically for wood shafts, and is designed to be used with wood shafts. This product is a FUJIKURA VENTUS HB BLUE or BLACK shaft for Hybrid Clubs. You can choose the shaft weight range and flex. Length: 42.5 inches (60 degrees) Grip: STM G-REX (select with or without back line) We do not perform any assembly using swing balance. It neither specifies balance nor measures balance. Club MOI will be around 2700-2770kg-c㎡ (varies depending on the shaft). ★The concavity of the back face achieves a high MOI between the left and right sides of the head, which is hard to believe that it is based on a muscle back. It is more tolerant of mis-hits than a full cavity, yet has the same operability as a muscle back. ★Following the sole shape of the hugely popular HAYABUSA wedge, it has achieved outstanding release for an iron. ★By making the leading edge as round and smooth as possible, the leading edge rarely cuts long grass in the rough, eliminating as much as possible the grass getting caught between the face and the ball. Even from long and tough roughs, there is almost no flyer, so even from the rough there is almost no change in vertical distance, so you can aggressively attack the green! ! The material is soft iron SS400. Although it may not be a familiar material, the hardness (softness) of SS400 is equivalent to S20C, so it is a softer material than the most commonly used soft iron, S25C. Customs duties and VAT may be applied depending on the country or region of sale. Please note that these taxes are separate from our prices. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。
-
JCM-01 Blade 0iron VENTUS HB BLUE or BLACK
¥81,400($561.66)
This is not a stock item and each piece is assembled by hand, so it will take about two weeks from assembly to delivery. Please note that we cannot sell to those who cannot wait until then. The ``Reishiki'' is a genuine No. 0 iron, not a utility soft iron forged muscle back. Based on the know-how cultivated with the Zero Type and the theory of club MOI matching, this is a specially manufactured model based on the JCM-01, which is a large muscle back head with a low center of gravity. Designed specifically for wood shafts, instead of the hosel diameter of regular irons. The loft is 12 degrees, the lie angle is 56 degrees, the latest model VENTUS-TR shaft is selected, and the length is 42.5 inches (60 degree method). Compared to the compact Zero type, the large head has been made as large and gentle as possible, and the neck length has been revised from the ground up to lower the center of gravity.We are committed to achieving the world's best not only in feel and flight distance, but also in terms of gentleness and ball lift. This is an ultra-long iron that pursues distance. The grip is the STM G-REX grip, which shows the high level of Japanese technology. You can choose whether or not there is a RIB. We will discuss the assembled club MOI around 2750kg-cm2, but we will not assemble the club with balance, nor will we measure the balance. I think it will be around D1 to D2, but please note that we do not guarantee it at all. Please note that if the shaft is not in stock, it may take more than two weeks. Customs duties and VAT may be applied depending on the country or region of sale. Please note that these taxes are separate from our prices. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。
-
The#0 Cavity iron JCM-03Cavity VENTUS-HB BLUE or BLACK
¥74,580($514.60)
Since this is not a stock item and each piece is assembled by hand, it will take approximately 7 days to ship after confirming payment. Also, since it is shipped outside of Japan, it will take some time to arrive. Please note that we cannot sell to those who cannot wait. In addition, we test our products with driving contest players with a head speed of about 60 m/s before selling them, but if you duff or mis-hit the ball strongly, the shaft may break. If you mis-hit or duff the ball strongly, the shaft may break with any club, so it is not a manufacturing defect on our part. Therefore, in the unlikely event that the shaft breaks, there is no guarantee, so please use it at your own risk. The genuine No. 0 iron 0-type hits that hit divine distances have led many golfers to say, ``Play the 0-type with a cavity back!'' By inserting a wood shaft with a loft of 12 degrees, a lie angle of 57 degrees, and a tip diameter of 8.5 mm, the basic concept of the Number Zero golf club, which is ``Achieve the maximum distance of your life with an iron!'', is maintained, but the head is enlarged with a cavity back. We have created a genuine No. 0 iron that can be hit by most golfers. For JCM-03Ver.ZERO, in order to let as many people as possible experience the charm of No. 0 irons, we have discontinued copper under plating and only have regular satin plating. This product is a FUJIKURA VENTUS HB BLUE or BLACK shaft for Hybrid Clubs. You can choose the shaft weight range and flex. Even so, the fact that we have created a long iron that anyone can hit without making any compromises in distance performance can be said to be the unique commitment of BoseIronFactory, which has absolute confidence in long irons. Head: Soft iron forged cavity back Loft: 12 degrees Lie angle: 57 degrees The grip is the STM G-REX grip, which shows the high level of Japanese technology. You can choose whether or not there is a back line. Length: Around 42.5 inches (60 degree method) Total weight: around 325g to 345g Club MOI: 2700kg-cm2 ~ 2800kg-cm2 In addition, the length and total weight will vary within the above range depending on the shaft weight difference due to the difference in flex and the grip weight tolerance. Customs duties and VAT may be applied depending on the country or region of sale. Please note that these taxes are separate from our prices. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。
-
Left-handed HAYABUSA Iron, loft 12 degrees, iron head only
¥49,800($343.62)
The ultimate left-handed iron, created by Japanese craftsman Falcon Matsubara. Loft 12 degrees Lie angle 57 degrees Made by Falcon Matsubara of the Bose Iron Factory, Japan's one and only club craftsman who is unrivaled when it comes to long irons. The HAYABUSA Iron has a recess in the center of the back face to distribute weight to the left and right of the head, achieving the same forgiveness as a cavity back iron while based on the shape of a blade iron. This is a one-of-a-kind iron club that combines the maneuverability of a blade iron with the forgiveness of a cavity back iron. Laser engraving is a paid option for products destined for Japan, but laser engraving is free for overseas customers. The engraving in the photo is pronounced ”HAYABUSA”, which means "Falcon" in Japanese.
-
HAYABUSA Iron 4~PW(10〕FUJIKURA TRAVIL Shaft 7 piece set Number display model
¥450,000($3,105.00)
For details of HAYABUSA Iron, please refer to the HAYABUSA special website. https://www.teshikaga.info/ The shaft is FUJIKURA TRAVIL85,95,105,115 Shafts. Please select the STM G-REX grip, which is the culmination of Japanese technology, with or without a backline. The features of HAYABUSA Iron are briefly described below. 1. Specially designed for club MOI matching! ! The special design for club MOI matching enables highly accurate MOI matching for individual golfers. 2.Due to the recesses on the back face, a high left and right MOI of the head is achieved, which makes it hard to believe that it is based on a muscle back. While more tolerant to miss hits than a full cavity, it has the same operability as a muscle back. 3.Following the shape of the sole of the hit HAYABUSA wedge, it has achieved outstanding release for an iron. 4.By making the leading edge as round and smooth as possible, the leading edge rarely cuts the long rough turf, eliminating as much turf as possible between the face and the ball. Even from the long tough rough, I rarely fly, so I can aggressively attack the green because the vertical distance hardly changes even from the rough! ! As is the case with the hit HAYABUSA wedge, Bose Iron Factory's Falcon Matsubara irons are made with great care. The material is soft iron SS400. It may not be a material that you are familiar with, but the hardness (softness) of SS400 is equivalent to S20C, so it is softer than the most commonly used soft iron S25C. The specifications of this head are different from those for the Japanese domestic market. When assembling, do not adjust the weight, but assemble with the included socket. Also, when assembling, be sure to assemble in increments of 0.5 inches. Please note that if you make a mistake in how to assemble, you will not be able to demonstrate the original performance. HAYABUSA Iron for overseas sales only 5~PW(10) TrueTemperDYNAMIC GOLD Shaft 6 piece set is a HAYABUSA iron set for overseas sales only.This set includes 6 TrueTemperDYNAMIC GOLD shafts from number 5 to PW (pitching wedge). It contains. HAYABUSA is known for its high quality iron clubs. This set combines the latest technology from leading manufacturers with high-end materials. As a result, it provides reliable flight distance and high accuracy, allowing players to improve their golf skills. Professional golfers with a long history and experience are involved in the development of this iron set. We pursued the best performance while receiving their feedback. As a result, we pay close attention to even the smallest details, such as the head design and shaft material selection. HAYABUSA Iron for overseas sales only 5~PW(10) TrueTemperDYNAMIC GOLD Shaft 6 piece set achieves the performance of a professional golfer class, while also considering operability and ease of hitting.Furthermore, its sophisticated design makes golf You will be one step ahead in terms of style. An important point is that this iron set is only sold overseas. We confidently deliver our products to golf enthusiasts overseas. Make your next golf play even more fulfilling with this HAYABUSA Iron for overseas sales only 5~PW(10) TrueTemperDYNAMIC GOLD Shaft 6 piece set. *Please be sure to read the instruction manual before playing. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。
-
HAYABUSA Iron 4~PW(10〕FUJIKURA TRAVIL Shaft 7 piece set Loft display model
¥450,000($3,105.00)
For details of HAYABUSA Iron, please refer to the HAYABUSA special website. https://www.teshikaga.info/ The shaft is FUJIKURA TRAVIL85,95,105,115 Shafts. Please select the STM G-REX grip, which is the culmination of Japanese technology, with or without a backline. The features of HAYABUSA Iron are briefly described below. 1. Specially designed for club MOI matching! ! The special design for club MOI matching enables highly accurate MOI matching for individual golfers. 2.Due to the recesses on the back face, a high left and right MOI of the head is achieved, which makes it hard to believe that it is based on a muscle back. While more tolerant to miss hits than a full cavity, it has the same operability as a muscle back. 3.Following the shape of the sole of the hit HAYABUSA wedge, it has achieved outstanding release for an iron. 4.By making the leading edge as round and smooth as possible, the leading edge rarely cuts the long rough turf, eliminating as much turf as possible between the face and the ball. Even from the long tough rough, I rarely fly, so I can aggressively attack the green because the vertical distance hardly changes even from the rough! ! "Goodbye to the iron distance competition!" Since the loft is displayed instead of the count number, we are focusing only on creating a solid flight distance staircase. Even if you are accompanied by someone who uses modern irons that only fly, you won't participate in the distance competition, so you don't have to force yourself to go down with short irons. As is the case with the hit HAYABUSA wedge, Bose Iron Factory's Falcon Matsubara irons are made with great care. The material is soft iron SS400. It may not be a material that you are familiar with, but the hardness (softness) of SS400 is equivalent to S20C, so it is softer than the most commonly used soft iron S25C. The specifications of this head are different from those for the Japanese domestic market. When assembling, do not adjust the weight, but assemble with the included socket. Also, when assembling, be sure to assemble in increments of 0.5 inches. Please note that if you make a mistake in how to assemble, you will not be able to demonstrate the original performance. HAYABUSA Iron for overseas sales only 5~PW(10) TrueTemperDYNAMIC GOLD Shaft 6 piece set is a HAYABUSA iron set for overseas sales only.This set includes 6 TrueTemperDYNAMIC GOLD shafts from number 5 to PW (pitching wedge). It contains. HAYABUSA is known for its high quality iron clubs. This set combines the latest technology from leading manufacturers with high-end materials. As a result, it provides reliable flight distance and high accuracy, allowing players to improve their golf skills. Professional golfers with a long history and experience are involved in the development of this iron set. We pursued the best performance while receiving their feedback. As a result, we pay close attention to even the smallest details, such as the head design and shaft material selection. HAYABUSA Iron for overseas sales only 5~PW(10) TrueTemperDYNAMIC GOLD Shaft 6 piece set achieves the performance of a professional golfer class, while also considering operability and ease of hitting.Furthermore, its sophisticated design makes golf You will be one step ahead in terms of style. An important point is that this iron set is only sold overseas. We confidently deliver our products to golf enthusiasts overseas. Make your next golf play even more fulfilling with this HAYABUSA Iron for overseas sales only 5~PW(10) TrueTemperDYNAMIC GOLD Shaft 6 piece set. *Please be sure to read the instruction manual before playing. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。
-
HAYABUSA Iron 4~PW(10〕TrueTemperDYNAMIC GOLD Shaft 7 piece set
¥400,000($2,760.00)
For details of HAYABUSA Iron, please refer to the HAYABUSA special website. https://www.teshikaga.info/ The shaft is TrueTemper Dynamic Gold Shaft. Choose the shaft flex from X100 or S200 Please select the STM G-REX grip, which is the culmination of Japanese technology, with or without a backline. The features of HAYABUSA Iron are briefly described below. 1. Specially designed for club MOI matching! ! The special design for club MOI matching enables highly accurate MOI matching for individual golfers. 2.Due to the recesses on the back face, a high left and right MOI of the head is achieved, which makes it hard to believe that it is based on a muscle back. While more tolerant to miss hits than a full cavity, it has the same operability as a muscle back. 3.Following the shape of the sole of the hit HAYABUSA wedge, it has achieved outstanding release for an iron. 4.By making the leading edge as round and smooth as possible, the leading edge rarely cuts the long rough turf, eliminating as much turf as possible between the face and the ball. Even from the long tough rough, I rarely fly, so I can aggressively attack the green because the vertical distance hardly changes even from the rough! ! "Goodbye to the iron distance competition!" Since the loft is displayed instead of the count number, we are focusing only on creating a solid flight distance staircase. Even if you are accompanied by someone who uses modern irons that only fly, you won't participate in the distance competition, so you don't have to force yourself to go down with short irons. As is the case with the hit HAYABUSA wedge, Bose Iron Factory's Falcon Matsubara irons are made with great care. The material is soft iron SS400. It may not be a material that you are familiar with, but the hardness (softness) of SS400 is equivalent to S20C, so it is softer than the most commonly used soft iron S25C. The specifications of this head are different from those for the Japanese domestic market. When assembling, do not adjust the weight, but assemble with the included socket. Also, when assembling, be sure to assemble in increments of 0.5 inches. Please note that if you make a mistake in how to assemble, you will not be able to demonstrate the original performance. HAYABUSA Iron for overseas sales only 5~PW(10) TrueTemperDYNAMIC GOLD Shaft 6 piece set is a HAYABUSA iron set for overseas sales only.This set includes 6 TrueTemperDYNAMIC GOLD shafts from number 5 to PW (pitching wedge). It contains. HAYABUSA is known for its high quality iron clubs. This set combines the latest technology from leading manufacturers with high-end materials. As a result, it provides reliable flight distance and high accuracy, allowing players to improve their golf skills. Professional golfers with a long history and experience are involved in the development of this iron set. We pursued the best performance while receiving their feedback. As a result, we pay close attention to even the smallest details, such as the head design and shaft material selection. HAYABUSA Iron for overseas sales only 5~PW(10) TrueTemperDYNAMIC GOLD Shaft 6 piece set achieves the performance of a professional golfer class, while also considering operability and ease of hitting.Furthermore, its sophisticated design makes golf You will be one step ahead in terms of style. An important point is that this iron set is only sold overseas. We confidently deliver our products to golf enthusiasts overseas. Make your next golf play even more fulfilling with this HAYABUSA Iron for overseas sales only 5~PW(10) TrueTemperDYNAMIC GOLD Shaft 6 piece set. *Please be sure to read the instruction manual before playing. Customs duties and VAT may be applied depending on the country or region of sale. Please note that these taxes are separate from our prices. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。
-
HAYABUSA Iron(No.1~No.3 Iron Single item) TrueTemperDYNAMIC GOLD Shaft Loft display model
¥60,000($414.00)
For details of HAYABUSA Iron, please refer to the HAYABUSA special website. https://www.teshikaga.info/ The shaft is TrueTemper Dynamic Gold Shaft. Choose the shaft flex from X100, S400, S300, S200, or R300. Please select the STM G-REX grip, which is the culmination of Japanese technology, with or without a backline. The features of HAYABUSA Iron are briefly described below. 1. Specially designed for club MOI matching! ! The special design for club MOI matching enables highly accurate MOI matching for individual golfers. 2.Due to the recesses on the back face, a high left and right MOI of the head is achieved, which makes it hard to believe that it is based on a muscle back. While more tolerant to miss hits than a full cavity, it has the same operability as a muscle back. 3.Following the shape of the sole of the hit HAYABUSA wedge, it has achieved outstanding release for an iron. 4.By making the leading edge as round and smooth as possible, the leading edge rarely cuts the long rough turf, eliminating as much turf as possible between the face and the ball. Even from the long tough rough, I rarely fly, so I can aggressively attack the green because the vertical distance hardly changes even from the rough! ! "Goodbye to the iron distance competition!" Since the loft is displayed instead of the count number, we are focusing only on creating a solid flight distance staircase. Even if you are accompanied by someone who uses modern irons that only fly, you won't participate in the distance competition, so you don't have to force yourself to go down with short irons. As is the case with the hit HAYABUSA wedge, Bose Iron Factory's Falcon Matsubara irons are made with great care. The material is soft iron SS400. It may not be a material that you are familiar with, but the hardness (softness) of SS400 is equivalent to S20C, so it is softer than the most commonly used soft iron S25C. The specifications of this head are different from those for the Japanese domestic market. When assembling, do not adjust the weight, but assemble with the included socket. Also, when assembling, be sure to assemble in increments of 0.5 inches. Please note that if you make a mistake in how to assemble, you will not be able to demonstrate the original performance. HAYABUSA Iron for overseas sales only 5~PW(10) TrueTemperDYNAMIC GOLD Shaft 6 piece set is a HAYABUSA iron set for overseas sales only.This set includes 6 TrueTemperDYNAMIC GOLD shafts from number 5 to PW (pitching wedge). It contains. HAYABUSA is known for its high quality iron clubs. This set combines the latest technology from leading manufacturers with high-end materials. As a result, it provides reliable flight distance and high accuracy, allowing players to improve their golf skills. Professional golfers with a long history and experience are involved in the development of this iron set. We pursued the best performance while receiving their feedback. As a result, we pay close attention to even the smallest details, such as the head design and shaft material selection. HAYABUSA Iron for overseas sales only 5~PW(10) TrueTemperDYNAMIC GOLD Shaft 6 piece set achieves the performance of a professional golfer class, while also considering operability and ease of hitting.Furthermore, its sophisticated design makes golf You will be one step ahead in terms of style. An important point is that this iron set is only sold overseas. We confidently deliver our products to golf enthusiasts overseas. Make your next golf play even more fulfilling with this HAYABUSA Iron for overseas sales only 5~PW(10) TrueTemperDYNAMIC GOLD Shaft 6 piece set. *Please be sure to read the instruction manual before playing. Customs duties and VAT may be applied depending on the country or region of sale. Please note that these taxes are separate from our prices. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。
-
HAYABUSA Iron head 4~PW(10) iron head 7 piece set 9.2mm (0.370) Tip
¥294,000($2,028.60)
For details of HAYABUSA Iron, please refer to the HAYABUSA special website. https://www.teshikaga.info/ The features of HAYABUSA Iron are briefly described below. 1. Specially designed for club MOI matching! ! The special design for club MOI matching enables highly accurate MOI matching for individual golfers. 2.Due to the recesses on the back face, a high left and right MOI of the head is achieved, which makes it hard to believe that it is based on a muscle back. While more tolerant to miss hits than a full cavity, it has the same operability as a muscle back. 3.Following the shape of the sole of the hit HAYABUSA wedge, it has achieved outstanding release for an iron. 4.By making the leading edge as round and smooth as possible, the leading edge rarely cuts the long rough turf, eliminating as much turf as possible between the face and the ball. Even from the long tough rough, I rarely fly, so I can aggressively attack the green because the vertical distance hardly changes even from the rough! ! "Goodbye to the iron distance competition!" Since the loft is displayed instead of the count number, we are focusing only on creating a solid flight distance staircase. Even if you are accompanied by someone who uses modern irons that only fly, you won't participate in the distance competition, so you don't have to force yourself to go down with short irons. As is the case with the hit HAYABUSA wedge, Bose Iron Factory's Falcon Matsubara irons are made with great care. The material is soft iron SS400. It may not be a material that you are familiar with, but the hardness (softness) of SS400 is equivalent to S20C, so it is softer than the most commonly used soft iron S25C. The specifications of this head are different from those for the Japanese domestic market. When assembling, do not adjust the weight, but assemble with the included socket. Also, when assembling, be sure to assemble in increments of 0.5 inches. Please note that if you make a mistake in how to assemble, you will not be able to demonstrate the original performance. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。
-
HAYABUSA Iron single head 1~4 iron head 9.2mm (0.370) Tip
¥42,000($289.80)
For details of HAYABUSA Iron, please refer to the HAYABUSA special website. https://www.teshikaga.info/ The features of HAYABUSA Iron are briefly described below. 1. Specially designed for club MOI matching! ! The special design for club MOI matching enables highly accurate MOI matching for individual golfers. 2.Due to the recesses on the back face, a high left and right MOI of the head is achieved, which makes it hard to believe that it is based on a muscle back. While more tolerant to miss hits than a full cavity, it has the same operability as a muscle back. 3.Following the shape of the sole of the hit HAYABUSA wedge, it has achieved outstanding release for an iron. 4.By making the leading edge as round and smooth as possible, the leading edge rarely cuts the long rough turf, eliminating as much turf as possible between the face and the ball. Even from the long tough rough, I rarely fly, so I can aggressively attack the green because the vertical distance hardly changes even from the rough! ! "Goodbye to the iron distance competition!" Since the loft is displayed instead of the count number, we are focusing only on creating a solid flight distance staircase. Even if you are accompanied by someone who uses modern irons that only fly, you won't participate in the distance competition, so you don't have to force yourself to go down with short irons. As is the case with the hit HAYABUSA wedge, Bose Iron Factory's Falcon Matsubara irons are made with great care. The material is soft iron SS400. It may not be a material that you are familiar with, but the hardness (softness) of SS400 is equivalent to S20C, so it is softer than the most commonly used soft iron S25C. The specifications of this head are different from those for the Japanese domestic market. When assembling, do not adjust the weight, but assemble with the included socket. Also, when assembling, be sure to assemble in increments of 0.5 inches. Please note that if you make a mistake in how to assemble, you will not be able to demonstrate the original performance. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。
-
Loft 14 degrees, HAYABUSA Iron True Temper Black Gold
¥55,000($379.50)
SOLD OUT
All our irons are assembled after receiving your order, so it will take about 1-2 weeks for delivery. Loft 14 degrees, lie angle 59.5 degrees Loft 14 degrees, HAYABUSA iron Shaft is True Temper Black Gold Length is 40.5 inches Grip: STM-G-REX Please contact us to let us know if you would like a back line or not. The color is black base. Laser engraving as shown in the photo will be added free of charge. Please choose whether or not you would like the engraving. This is an original model from Bose Iron Factory that is unrivaled in long irons. It has a classic muscle back shape with an extremely thin top line, and is an easy-to-use model despite its difficult appearance. However, the shaft is made of black gold dead stock, which is heavier and harder than Dynamic Gold, making it a hard-hitting model that is also suitable for hitting with the No. 1 iron.
-
Ultimate HAYABUSA LimitedForged wedge Completely made-to-order products
¥300,000($2,070.00)
HAYABUSA wedges are created from a physical perspective cultivated through three years of repeated club MOI matching and testing. A wedge that overturns common sense has been completed with a rough 30 to 40 cm that can be considered a threat and a sole grind that cannot be chucked even if you try. HAYABUSA Limited Forged wedges are packed with all the commitment and technology of Japanese craftsmen, regardless of cost, in order to create the best wedges in the world. In particular, face milling is the only one in the world that takes three days to complete, and it boasts the best spin performance while complying with the rules. The loft angle can be set as desired from 48 degrees to 60 degrees in 0.5 degree increments. Lie angles can also be manufactured within a range of plus or minus 2 degrees around 64 degrees. You can also choose the type of plating. This is a made-to-order product, so it will take about 2 months from the time you place your order. We will manufacture the product after discussing details via email at seabose@me.com. Regarding bounce, HAYABUSA's special sole shape does not fit into the general concept of bounce, so we will not disclose the bounce information. Regarding shafts and grips, we can handle most shafts and grips that are available in Japan, so please let us know your preferences. The specifications of this head are different from those for Japan. When assembling, do not adjust the weight; use the included socket. Please note that if you assemble it incorrectly, it will not achieve its original performance. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて組上げ済みの販売をしております。
-
The ultimate #0 iron REI-Shiki(The ZERO) Head Only
¥45,000($310.50)
BoseIronFactory 0 Iron REI-SHIKI Loft 12 degrees, lie angle 57 degrees Sold as a single head. Introducing a further evolution of the genuine No. 0 iron "Type 0", which is not a utility soft iron forged muscle back. The material is S25C, which is soft iron, and the neck uses the same one-piece forging method as Mizuno, achieving a soft feel on impact. The shaft is designed specifically for driver shafts and is 8.5mm (0.335Tip). Laser engraving is a paid option for products destined for Japan, but laser engraving is free for overseas customers. The engraving in the photo is pronounced REI-SHIKI, which means "Type 0" in Japanese. We have made great progress in areas that are not visible to the naked eye, such as reviewing the head from scratch and resetting the center of gravity distance. The final polishing was done by Mr. Falcon Matsubara himself, and nearly 20 improvements were made, including special soft black plating on top of the copper base plating. Type 0 Ver. 2015 will be a powerful weapon in actual battles, satisfy the sense of ownership, incorporate all the features of an iron that can be considered at the moment, and achieve the world's best feel and flight distance. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。
-
HAYABUSA Iron No. 0 iron single item head loft 12 degrees 8.5mm(0.335)Tip
¥50,000($345.00)
For details of HAYABUSA Iron, please refer to the HAYABUSA special website. https://www.teshikaga.info/ The features of HAYABUSA Iron are briefly described below. 1. Specially designed for club MOI matching! ! The special design for club MOI matching enables highly accurate MOI matching for individual golfers. 2.Due to the recesses on the back face, a high left and right MOI of the head is achieved, which makes it hard to believe that it is based on a muscle back. While more tolerant to miss hits than a full cavity, it has the same operability as a muscle back. 3.Following the shape of the sole of the hit HAYABUSA wedge, it has achieved outstanding release for an iron. 4.By making the leading edge as round and smooth as possible, the leading edge rarely cuts the long rough turf, eliminating as much turf as possible between the face and the ball. Even from the long tough rough, I rarely fly, so I can aggressively attack the green because the vertical distance hardly changes even from the rough! ! "Goodbye to the iron distance competition!" Since the loft is displayed instead of the count number, we are focusing only on creating a solid flight distance staircase. Even if you are accompanied by someone who uses modern irons that only fly, you won't participate in the distance competition, so you don't have to force yourself to go down with short irons. As is the case with the hit HAYABUSA wedge, Bose Iron Factory's Falcon Matsubara irons are made with great care. The material is soft iron SS400. It may not be a material that you are familiar with, but the hardness (softness) of SS400 is equivalent to S20C, so it is softer than the most commonly used soft iron S25C. The specifications of this head are different from those for the Japanese domestic market. When assembling, do not adjust the weight, but assemble with the included socket. Also, when assembling, be sure to assemble in increments of 0.5 inches. Please note that if you make a mistake in how to assemble, you will not be able to demonstrate the original performance. JCM-03Cavity No. 0 iron. This head is sold separately for use outside Japan. (We do not sell within Japan) Loft: 12 degrees Lie angle: 56 degrees Head weight: approx. 217g Tip: 0.335 (for 8.5mm Tip) When assembling a No. 0 iron head, special techniques and processing are required depending on the characteristics and strength of the shaft. Broken shafts, etc. are due to assembly defects, and our company does not take any responsibility. Please use at your own risk. For details of HAYABUSA Iron, please refer to the HAYABUSA special website. https://www.teshikaga.info/ The features of HAYABUSA Iron are briefly described below. 1. Specially designed for club MOI matching! ! The special design for club MOI matching enables highly accurate MOI matching for individual golfers. 2.Due to the recesses on the back face, a high left and right MOI of the head is achieved, which makes it hard to believe that it is based on a muscle back. While more tolerant to miss hits than a full cavity, it has the same operability as a muscle back. 3.Following the shape of the sole of the hit HAYABUSA wedge, it has achieved outstanding release for an iron. 4.By making the leading edge as round and smooth as possible, the leading edge rarely cuts the long rough turf, eliminating as much turf as possible between the face and the ball. Even from the long tough rough, I rarely fly, so I can aggressively attack the green because the vertical distance hardly changes even from the rough! ! "Goodbye to the iron distance competition!" Since the loft is displayed instead of the count number, we are focusing only on creating a solid flight distance staircase. Even if you are accompanied by someone who uses modern irons that only fly, you won't participate in the distance competition, so you don't have to force yourself to go down with short irons. As is the case with the hit HAYABUSA wedge, Bose Iron Factory's Falcon Matsubara irons are made with great care. The material is soft iron SS400. It may not be a material that you are familiar with, but the hardness (softness) of SS400 is equivalent to S20C, so it is softer than the most commonly used soft iron S25C. Also, when assembling, be sure to assemble in increments of 0.5 inches. Please note that if you make a mistake in how to assemble, you will not be able to demonstrate the original performance. Loft: 12 degrees Lie angle: 56 degrees Head weight: approx. 217g Tip: 0.335 (for 8.5mm Tip) When assembling a No. 0 iron head, special techniques and processing are required depending on the characteristics and strength of the shaft. Broken shafts, etc. are due to assembly defects, and our company does not take any responsibility. Please use at your own risk. The specifications of this head are different from those for the Japanese domestic market. When assembling, do not adjust the weight, but assemble with the included socket. Also, when assembling, be sure to assemble in increments of 0.5 inches. Please note that if you make a mistake in how to assemble, you will not be able to demonstrate the original performance. Loft: 12 degrees Lie angle: 56 degrees Head weight: approx. 217g Tip: 0.335 (for 8.5mm Tip) When assembling a No. 0 iron head, special techniques and processing are required depending on the characteristics and strength of the shaft. Broken shafts, etc. are due to assembly defects, and our company does not take any responsibility. Please use at your own risk. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。
-
JCM-01 Blade No.0 iron single head 8.5mm (0.335) Tip
¥48,000($331.20)
The ultimate iron that is packed with the commitment to the irons of Falcon Matsubara, a famous club craftsman in Japan. The ultra-thin topline is sharp enough to be called a blade. The lineup starts at 0 iron loft 12 degrees, and PW is 10. It is designed specifically for club MOI matching, so it is made so that many people can hit even the 1 iron. The material is soft iron SS400. It may not be a material that you are familiar with, but the hardness (softness) of SS400 is equivalent to S20C, so it is softer than the most commonly used soft iron S25C. The specifications of this head are different from those for the Japanese domestic market. When assembling, do not adjust the weight, but assemble with the included socket. Also, when assembling, be sure to assemble in increments of 0.5 inches. Please note that if you make a mistake in how to assemble, you will not be able to demonstrate the original performance. When assembling a No. 0 iron head, special techniques and processing are required depending on the characteristics and strength of the shaft. Broken shafts, etc. are due to assembly defects, and our company does not take any responsibility. Please use at your own risk. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。
-
JCM-01L left handed iron head No. 0 iron single item head loft 12 degrees 8.5mm(0.335)Tip
¥49,000($338.10)
No. 0 iron single item head loft 12 degrees 8.5mm(0.335)Tip The ultimate left-handed iron by Japanese craftsman Falcon Matsubara, who was originally left-handed. Left handed muscle back iron. The orthodox design is designed with respect for Mizuno TN-87. A lineup of 1 iron to PW (10), which is very rare for left-handers. When assembling a No. 0 iron head, special techniques and processing are required depending on the characteristics and strength of the shaft. Broken shafts, etc. are due to assembly defects, and our company does not take any responsibility. Please use at your own risk. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。
-
JCM-03 Cavity 0iron single head 0.335Tip(8.5mm)
¥42,000($289.80)
JCM-03Cavity No. 0 iron. This head is sold separately for use outside Japan. (We do not sell within Japan) Loft: 12 degrees Lie angle: 56 degrees Head weight: approx. 217g Tip: 0.335 (for 8.5mm Tip) When assembling a No. 0 iron head, special techniques and processing are required depending on the characteristics and strength of the shaft. Broken shafts, etc. are due to assembly defects, and our company does not take any responsibility. Please use at your own risk. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。
-
Loft 8 degrees! ! L.D.I.Project-X2 single item head only
¥55,000($379.50)
8 degree loft, special hosel design for wood shaft insertion. The head of the world's strongest super long iron, both in name and reality, is sold separately. Ver.2 uses a CNC cavity JCM-03 cavity head, making it stronger and flying farther. Just as not many people can hit an 8-degree driver perfectly, this iron chooses the player. However, there is a professional driver golfer who actually hit the ball 336.8 yards with this iron, so if you are a perfect player, you can get an iron that boasts that distance performance. Of course, it can also be used in competitions. Please note that assembling this product requires skill, so we do not guarantee against breakage of the shaft when selling the head separately. Please purchase, assemble, and play at your own risk. Customs duties and VAT may be applied depending on the country or region of sale. Please note that these taxes are separate from our prices.
-
REI-SHIKI Iron No.1~4 Iron Head ONLY
¥36,300($250.47)
Type 0 irons 1 to 4 iron heads are sold separately. No. 1 loft 15 degrees No. 2 loft 18 degrees No. 3 loft 21 degrees No. 4 loft 24 degrees It will be 0.370Tip. The items in stock are pre-plated, so you can choose from the 13 types listed below. 1.chrome-satin 2.chrome-mirror 3.white-chrome 4.soft-black 5.mirror-black 6.beads-boron 7.satin-boron 8.mirror-boron 9.white-beads-boron-add 10.black-boron-frosted 11.black-boron 12.copper-satin 13.copper-mirror Also, since the plating will be done after your purchase, it will take approximately one month for it to be shipped. Customs duties and VAT may be applied depending on the country or region of sale. Please note that these taxes are separate from our prices.
-
REI-SHIKI Iron No.5~PW Set Iron HEAD ONLY
¥217,800($1,502.82)
We are selling Type 0 irons 5-PW iron headsets. No. 5: Loft 28 degrees No. 6: Loft 32 degrees No. 7: Loft 36 degrees No. 8: Loft 40 degrees No. 9: Loft 44 degrees PW: Loft 47.5 degrees It will be a set of 6 pieces. It will be 0.370Tip. The items in stock are pre-plated, so you can choose from the 13 types listed below. 1.chrome-satin 2.chrome-mirror 3.white-chrome 4.soft-black 5.mirror-black 6.beads-boron 7.satin-boron 8.mirror-boron 9.white-beads-boron-add 10.black-boron-frosted 11.black-boron 12.copper-satin 13.copper-mirror Also, since the plating will be done after your purchase, it will take approximately one month for it to be shipped. Customs duties and VAT may be applied depending on the country or region of sale. Please note that these taxes are separate from our prices.
-
JCM-01 Blade single head 1~4 iron head 9.2mm (0.370) Tip
¥38,500($265.65)
The ultimate iron that is packed with the commitment to the irons of Falcon Matsubara, a famous club craftsman in Japan. The ultra-thin topline is sharp enough to be called a blade. The lineup starts at 0 iron loft 12 degrees, and PW is 10. It is designed specifically for club MOI matching, so it is made so that many people can hit even the 1 iron. The material is soft iron SS400. It may not be a material that you are familiar with, but the hardness (softness) of SS400 is equivalent to S20C, so it is softer than the most commonly used soft iron S25C. The specifications of this head are different from those for the Japanese domestic market. When assembling, do not adjust the weight, but assemble with the included socket. Also, when assembling, be sure to assemble in increments of 0.5 inches. Please note that if you make a mistake in how to assemble, you will not be able to demonstrate the original performance. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。
-
JCM-01 Blade iron single head 5~PW iron head 6 piece set 9.2mm (0.370) Tip
¥269,500($1,859.55)
The ultimate iron that is packed with the commitment to the irons of Falcon Matsubara, a famous club craftsman in Japan. The ultra-thin topline is sharp enough to be called a blade. The lineup starts at 0 iron loft 12 degrees, and PW is 10. It is designed specifically for club MOI matching, so it is made so that many people can hit even the 1 iron. The material is soft iron SS400. It may not be a material that you are familiar with, but the hardness (softness) of SS400 is equivalent to S20C, so it is softer than the most commonly used soft iron S25C. The specifications of this head are different from those for the Japanese domestic market. When assembling, do not adjust the weight, but assemble with the included socket. Also, when assembling, be sure to assemble in increments of 0.5 inches. Please note that if you make a mistake in how to assemble, you will not be able to demonstrate the original performance. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。
-
JCM-01L left handed iron head 1~4 iron head 9.2mm (0.370) Tip
¥38,500($265.65)
The ultimate left-handed iron by Japanese craftsman Falcon Matsubara, who was originally left-handed. Left handed muscle back iron. The orthodox design is designed with respect for Mizuno TN-87. A lineup of 1 iron to PW (10), which is very rare for left-handers. 本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。 日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。 日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。
-
JCM-01L left handed iron head 5~PW iron head 6 piece set 9.2mm (0.370) Tip
¥231,000($1,593.90)
The ultimate left-handed iron by Japanese craftsman Falcon Matsubara, who was originally left-handed. Left handed muscle back iron. The orthodox design is designed with respect for Mizuno TN-87. A lineup of 1 iron to PW (10), which is very rare for left-handers.