HAYABUSA Iron No. 0 iron single item head loft 12 degrees 8.5mm(0.335)Tip

For details of HAYABUSA Iron, please refer to the HAYABUSA special website.
https://www.teshikaga.info/

The features of HAYABUSA Iron are briefly described below.

1. Specially designed for club MOI matching! !
The special design for club MOI matching enables highly accurate MOI matching for individual golfers.

2.Due to the recesses on the back face, a high left and right MOI of the head is achieved, which makes it hard to believe that it is based on a muscle back.
While more tolerant to miss hits than a full cavity, it has the same operability as a muscle back.

3.Following the shape of the sole of the hit HAYABUSA wedge, it has achieved outstanding release for an iron.

4.By making the leading edge as round and smooth as possible, the leading edge rarely cuts the long rough turf, eliminating as much turf as possible between the face and the ball.
Even from the long tough rough, I rarely fly, so I can aggressively attack the green because the vertical distance hardly changes even from the rough! !

"Goodbye to the iron distance competition!"
Since the loft is displayed instead of the count number, we are focusing only on creating a solid flight distance staircase.
Even if you are accompanied by someone who uses modern irons that only fly, you won't participate in the distance competition, so you don't have to force yourself to go down with short irons.

As is the case with the hit HAYABUSA wedge, Bose Iron Factory's Falcon Matsubara irons are made with great care.

The material is soft iron SS400.
It may not be a material that you are familiar with, but the hardness (softness) of SS400 is equivalent to S20C, so it is softer than the most commonly used soft iron S25C.

The specifications of this head are different from those for the Japanese domestic market.
When assembling, do not adjust the weight, but assemble with the included socket.
Also, when assembling, be sure to assemble in increments of 0.5 inches.

Please note that if you make a mistake in how to assemble, you will not be able to demonstrate the original performance.

JCM-03Cavity No. 0 iron.
This head is sold separately for use outside Japan.
(We do not sell within Japan)

Loft: 12 degrees
Lie angle: 56 degrees
Head weight: approx. 217g
Tip: 0.335 (for 8.5mm Tip)

When assembling a No. 0 iron head, special techniques and processing are required depending on the characteristics and strength of the shaft.
Broken shafts, etc. are due to assembly defects, and our company does not take any responsibility.
Please use at your own risk.
For details of HAYABUSA Iron, please refer to the HAYABUSA special website.
https://www.teshikaga.info/

The features of HAYABUSA Iron are briefly described below.

1. Specially designed for club MOI matching! !
The special design for club MOI matching enables highly accurate MOI matching for individual golfers.

2.Due to the recesses on the back face, a high left and right MOI of the head is achieved, which makes it hard to believe that it is based on a muscle back.
While more tolerant to miss hits than a full cavity, it has the same operability as a muscle back.

3.Following the shape of the sole of the hit HAYABUSA wedge, it has achieved outstanding release for an iron.

4.By making the leading edge as round and smooth as possible, the leading edge rarely cuts the long rough turf, eliminating as much turf as possible between the face and the ball.
Even from the long tough rough, I rarely fly, so I can aggressively attack the green because the vertical distance hardly changes even from the rough! !

"Goodbye to the iron distance competition!"
Since the loft is displayed instead of the count number, we are focusing only on creating a solid flight distance staircase.
Even if you are accompanied by someone who uses modern irons that only fly, you won't participate in the distance competition, so you don't have to force yourself to go down with short irons.

As is the case with the hit HAYABUSA wedge, Bose Iron Factory's Falcon Matsubara irons are made with great care.

The material is soft iron SS400.
It may not be a material that you are familiar with, but the hardness (softness) of SS400 is equivalent to S20C, so it is softer than the most commonly used soft iron S25C.

Also, when assembling, be sure to assemble in increments of 0.5 inches.

Please note that if you make a mistake in how to assemble, you will not be able to demonstrate the original performance.

Loft: 12 degrees
Lie angle: 56 degrees
Head weight: approx. 217g
Tip: 0.335 (for 8.5mm Tip)

When assembling a No. 0 iron head, special techniques and processing are required depending on the characteristics and strength of the shaft.
Broken shafts, etc. are due to assembly defects, and our company does not take any responsibility.
Please use at your own risk.
The specifications of this head are different from those for the Japanese domestic market.
When assembling, do not adjust the weight, but assemble with the included socket.
Also, when assembling, be sure to assemble in increments of 0.5 inches.

Please note that if you make a mistake in how to assemble, you will not be able to demonstrate the original performance.

Loft: 12 degrees
Lie angle: 56 degrees
Head weight: approx. 217g
Tip: 0.335 (for 8.5mm Tip)

When assembling a No. 0 iron head, special techniques and processing are required depending on the characteristics and strength of the shaft.
Broken shafts, etc. are due to assembly defects, and our company does not take any responsibility.
Please use at your own risk.
本商品は海外専用商品につき日本国内のお客様に対しての販売は行いません。
日本国内のお客様がお買い上げになった場合、ショッピングカートのシステム上、送料0円として表示されますが、弊社でキャンセルさせて頂きますので、ご了承ください。
日本国内のお客様に関しましては、https://longiron.net/にて、同じ品質でより安価なクラブ(組上げ済み)の販売をしております。